Are you looking to reset your water softener? A factory reset will revert all of your settings (hardness, recharge time, salt level, etc.) to the default factory settings. This reset is simple and can be done in 3 quick steps. After you do this, you'll need to re-program your water softener settings again. Let's get started!
1. You'll need to hold the Select button for several seconds, until you see the model code come up (ex. E31P).
2. Now, Press the Up arrow and you should see 'SoS' on the screen:
3. Press the Select button once more to restart the display board. You'll need to re-program the softener now so head on over to our article Softener Programming Guide for instructions.
Please let us know if this article was helpful by voting below.